typical applications telecommunications and networking equipment computers and peripherals instrumentation and controls our easy build-a-switch concept allows you to mix and match options to create the switch you need. below is a complete listing of options shown in catalog. to order, simply select desired option from each category and place in the appropriate box . switches with standard options are shown on pages b-11 and b-12. available options are shown and described on pages b-12 thru b-16. for additional options not shown in catalog, consult customer service center. all models have epoxy terminal seal and are compatible with all abottom-washo pcb cleaning methods. build-a-switch features /benefits subminiature size e capable of switching 1 amp vertical & right angle terminations pc & panel mount models snap-in front panel mounting available models available tp11 sh8 a b e switch function tp11 (std.) spst off-mom. tp12 (std.) spdt on-mom. tp21 dpst off-mom. actuator or bushing sh (std.) .155 high plunger, unthreaded, .220 high bushing, round sh8 (std.) .155 high plunger, unthreaded, .220 high bushing , flat sh9 (std.) .155 high plunger, .220 high bushing j80 snap-in j81 snap-in with frame lt .215 high plunger, .310 high bushing, flat lt9 .215 high plunger, unthreaded, .310 high bushing, flat ms9 .130 high plunger, .020 high bushing, round terminations a (std.) right angle, pc thru-hole c (std.) pc thru-hole z (std.) solder lug av vertical right angle, pc thru-hole v3 vertical mount, v-bracket w wire wrap contact material b (std.) gold q (std.) silver k gold m silver g gold over silver l gold over silver seal e (std.) epoxy cap color 2 (std.) black none models with no cap 1 white 3 red frame color 2 (std.) black none models with no frame typical example: tiny pushbutton switches tp series pushbutton b b-10 c&k components, inc. web site : www.ckcorp.com americas sales tel: 800-635-5936 fax: 617-926-6846 europe sales tel: +44-1536-521147 fax: +44-1536-411602 asia sales tel: +852-2798-6393 fax: +852-2751-9926 rev. a 8/99
switches with standard options tp12shzqe mom. = momentary mom. = momentary mom. = momentary sp models dp models omit center terminals for spst & dpst models. tp12sh8abe tp12sh9abe spdt spdt note : for pc termination, replace `z' with `c'. for panel & pc mounting information, see page b-13. note : for pc mounting information, see page b-14. note : for pc mounting information, see page b-14. omit center terminal for spst models. spdt omit center terminal for spst models. tiny pushbutton switches tp series pushbutton b b-11 c&k components, inc. web site : www.ckcorp.com americas sales tel: 800-635-5936 fax: 617-926-6846 europe sales tel: +44-1536-521147 fax: +44-1536-411602 asia sales tel: +852-2798-6393 fax: +852-2751-9926 specifications contact rating: b contact material: 0.4 va max. @ 20 v ac or dc max. q contact material: 1 amp @ 120 v ac or 28 v dc. see page b-16 for additional ratings. electrical life: tp11, tp21 models: 60,000 make-and-break cycles at full load. tp12 models: 30,000 cycles. contact resistance: below 20 milliohms typ. initial @ 2-4 v dc, 100 ma, for both silver and gold plated contacts. insulation resistance: 10 9 ohms min. dielectric strength: 1000 v rms min. @ sea level. operating temperature: 30 c to 85 c. solderability: per mil-std-202f method 208d, or eia rs-186e method 9 (1 hour steam aging). note : specifications and materials listed above are for switches with standard options. for information on specific and custom switches, consult customer service center. materials case: glass filled nylon 6/6, flame retardant, heat stabilized or diallyl phthalate (dap), (ul 94v-0). plunger: thermoplastic polyester (ul 94v-0). cap & frame: nylon, black standard. bushing: brass, nickel plated. housing: stainless steel. switch support: brass, tin plated. end contacts: b contact material: copper alloy, with gold plate over nickel plate. q contact material: coin silver, silver plated. see page b-16 for additional contact materials. center contact & all terminals: b contact material: copper alloy, with gold plate over nickel plate. q contact material: copper alloy, silver plated. see page b-16 for additional contact materials. terminal seal: epoxy. hardware: nut & locking ring: brass nickel plated. lockwasher: steel, nickel plated. pos. 1 pos. 2 part number function ??? tp11shzqe tp12shzqe tp21shzqe spst spdt dpst off on off mom. mom. mom. pos. 1 pos. 2 part number function ?? ?? tp11sh8abe tp12sh8abe spst spdt off on mom. mom. pos. 1 pos. 2 part number function ?? ?? tp11sh9abe tp12sh9abe spst spdt off on mom. mom. rev. a 8/99
switch function all models with all options when ordered with g, l, m or q contact material. mom. = momentary actuatoresnap-in front mount actuator or bushing cap color frame color j80 j81 note: no frame color choice required. panel mounting panel mounting cap and frame finish: matte. other colors available, consult customer service center. note : available with z, c, or w terminations. snap-in snap-in with frame tp11j80zqe tp11j81zqe spst spst switches with standard options tp11sh9avbe spst mom. = momentary note : for pc mounting information, see page b-14. tiny pushbutton switches tp series pushbutton b b-12 c&k components, inc. web site : www.ckcorp.com americas sales tel: 800-635-5936 fax: 617-926-6846 europe sales tel: +44-1536-521147 fax: +44-1536-411602 asia sales tel: +852-2798-6393 fax: +852-2751-9926 pos. 1 pos. 2 part number function ??? tp11sh9avbe spst off mom. switch function connected terminals pos. 1 pos. 2 pos. 1 pos. 2 no. poles model no. ??? ??? schematic sp tp11 (std.) off mom. open 1-3 spst tp12 (std.) on mom. 2-1 2-3 spdt dp tp21 off mom. open 1-3,4-6 dpst option code cap color 2 (std.) black 1 white 3 red option code frame color 2 (std.) black none no frame color (j80 option) rev. a 8/99
bushing actuator or bushing standard with z, c, w terminations. standard with a, av, v3 terminations. sh sh9 (std.) .155a high plunger, .220a high bushing, unthreaded, flat sh8 (std.) .155a high plunger, .220a high bushing, unthreaded not available with z terminations. ms9 lt9 .215a high plunger, .310a high bushing, unthreaded lt subtract .016 (0,41) for models with a, av or v3 terminations. panel mounting 10-48 bushing 1/4 in. bushing without locking ring with standard locking ring without locking ring with standard locking ring note : one mounting nut, locking ring and lockwasher supplied standard with 10-48 threaded bushings (two nuts with 1/4-40 bushings). optional mounting nut and locking ring styles and finishes available separately, see section l. (std.) .155a high plunger, .220a high bushing, threaded, flat .215a high plunger, .310a high bushing, threaded .130a high plunger sp dp not available with ms9 bushing or k, l or m contact material. z (std.) solder lug sp dp w wire wrap pc mounting sp dp c (std.) pc thru-hole terminations tiny pushbutton switches tp series pushbutton b b-13 c&k components, inc. web site : www.ckcorp.com americas sales tel: 800-635-5936 fax: 617-926-6846 europe sales tel: +44-1536-521147 fax: +44-1536-411602 asia sales tel: +852-2798-6393 fax: +852-2751-9926 rev. a 8/99
tp11sh9abe tp12sh9abe tp21sh9abe tp11sh9avbe spst spdt dpst spst terminations a tp11 only pc mounting tp12 only tp21 only pc mounting pc mounting a a (std.) right angle, pc thru-hole (std.) right angle, pc thru-hole (std.) right angle, pc thru-hole tp11 only pc mounting av note : terminal bend radii and lead-in manufacturing option. vertical right angle, pc thru-hole tiny pushbutton switches tp series pushbutton b b-14 c&k components, inc. web site : www.ckcorp.com americas sales tel: 800-635-5936 fax: 617-926-6846 europe sales tel: +44-1536-521147 fax: +44-1536-411602 asia sales tel: +852-2798-6393 fax: +852-2751-9926 rev. a 8/99
tp12sh9avbe tp21sh9avbe tp11sh9v3be tp12sh9v3be spdt dpst spst spdt tp12 only note : terminal bend radii and lead-in manufacturing option. pc mounting av terminations av v3 tp11 only pc mounting pc mounting tp21 only note : terminal bend radii and lead-in manufacturing option. vertical right angle, pc thru-hole vertical right angle, pc thru-hole vertical mount, v-bracket v3 tp12 only pc mounting vertical mount, v-bracket tiny pushbutton switches tp series pushbutton b b-15 c&k components, inc. web site : www.ckcorp.com americas sales tel: 800-635-5936 fax: 617-926-6846 europe sales tel: +44-1536-521147 fax: +44-1536-411602 asia sales tel: +852-2798-6393 fax: +852-2751-9926 rev. a 8/99
v3 tp21 only tp21sh9v3be pc mounting terminations contact material / application recommendations see chart, page l-31. 1 contacts & terminals: copper alloy, with gold plate over nickel plate. 2 end contacts: coin silver, with gold plate over nickel plate. 3 center contacts & all terminals: copper alloy, with gold plate over nickel plate. 4 end contacts: coin silver, silver plated. 5 center contacts & all terminals: copper alloy, silver plated. 6 terminals: copper alloy, with tin-lead alloy over nickel plate. b contact material standard with a, av, v3 & w terminations. q contact material standard with c & z terminations. k, l & m contact materials not available with z terminations. all models with all options when ordered with g, l, m or q contact material. contact material e (std.) epoxy seal seal vertical mount, v-bracket dpst tiny pushbutton switches tp series pushbutton b b-16 c&k components, inc. web site : www.ckcorp.com americas sales tel: 800-635-5936 fax: 617-926-6846 europe sales tel: +44-1536-521147 fax: +44-1536-411602 asia sales tel: +852-2798-6393 fax: +852-2751-9926 option code contact material terminal plating ratings b (std.) gold 1 gold 1 low level / dry circuit 04vamax @20vacordcmax k gold 1 tin-lead 6 low level / dry circuit 0.4 va max. @ 20 v ac or dc max. q (std.) silver 45 silver 5 power 1amp@120vacor28vdc m silver 4,5 tin-lead 6 power 1 amp @ 120 v ac or 28 v dc. g gold over silver 23 gold 3 low level / dry circuit or power 0.4 va max @ 20 v ac or dc max. or l gold over silver 2,3 tin-lead 6 low level / dry circuit or power 0 . 4 va max @ 20 v ac or dc max . or 1 amp @ 120 v ac or 28 v dc. rev. a 8/99
|
